DAEWOO M–150 BL2
IMMOBILIZER ANTI-THEFT SYSTEM 9T – 29
Installation Procedure
After replacing the immobilizer control unit, the keys
must be re-authorized using the key coding procedure.
Refer to "Key Coding Procedure" in this section. Also,
the electronic control module (ECM) identification (ID)
code must be reset. Refer to "Identification (ID) Code
Reprogramming" in this section.
1. Connect the electrical connectors to the immobilizer
control unit.
2. Slide the immobilizer control unit onto its mounting
bracket.
D29T004
3. Install the steering column covers. Refer to Section
6E, Steering Wheel and Column.
4. Connect the negative battery cable.
D105A505