Show Snmp-Server Group - Allied Telesis AT-AR3050S Command Reference Manual

SNMP C
OMMANDS
-
SHOW SNMP SERVER GROUP

show snmp-server group

Overview This command displays information about SNMP server groups. This command is
used with SNMP version 3 only.
show snmp-server group
Syntax
Mode Privileged Exec
Example To display the SNMP groups configured on the device, use the command:
awplus#
Output Figure 40-6: Example output from the show snmp-server group command
Related show snmp-server
Commands
snmp-server group
C613-50077-01 REV A
show snmp-server group
SNMP group information:
Group name .............. guireadgroup
Security Level ........ priv
Read View ............. guiview
Write View ............ none
Notify View ........... none

Group name .............. guiwritegroup
Security Level ........ priv
Read View ............. none
Write View ............ guiview
Notify View ........... none
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
1952