Show Trigger - Allied Telesis AT-AR3050S Command Reference Manual

T C
RIGGER OMMANDS

SHOW TRIGGER

show trigger
Overview This command displays configuration and diagnostic information about the
triggers configured on the device. Specify the show trigger command without
any options to display a summary of the configuration of all triggers.
show trigger [<1-250>|counter|full]
Syntax
Mode Privileged Exec
Example To get summary information about all triggers, use the following command:
awplus#
Table 1: Example output from the show trigger command
awplus#show trigger
TR# Type & Details
---------------------------------------------------------------------------------
001 USB
(in)
002 USB
(out)
003 CPU (80% any)
005 Periodic (30 min)
007 Memory (85% up)
011 Time (00:01)
013 Reboot
017 Interface (vlan1 ... Change config for... Y
019 Ping-poll (5 up)
---------------------------------------------------------------------------------
Table 2: Parameters in the output of the show trigger command
C613-50077-01 REV A
Parameter Description
<1-250>
Displays detailed information about a specific trigger, identified by its
trigger ID.
counter
Displays statistical information about all triggers.
full
Displays detailed information about all triggers.
show trigger
Name
Busy CPU
Regular status check Y
High mem usage
Weekend access
Connection to svr1
Parameter Description
TR#
Trigger identifier (ID).
Type &
The trigger type, followed by the trigger details in brackets.
Details
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
Ac Te Tr Repeat
Y N Y Continuous
Y N Y Continuous
Y N Y 5
N N Continuous
Y N Y 8
Y N Y Continuous
Y N Y Continuous
N Y Once
Y N Y Continuous
#Scr Days/Date
0 smtwtfs
0 smtwtfs
1 smtwtfs
1 -mtwtf-
1 smtwtfs
1 ------s
2 smtwtfs
1 2-apr-2008
1 smtwtfs
2048