Ntp Authentication-Key - Allied Telesis AT-AR3050S Command Reference Manual

NTP C
OMMANDS
-
NTP AUTHENTICATION KEY

ntp authentication-key

Overview This command defines each of the authentication keys. Each key has a key number,
a type, and a value. Currently, the only key type supported is MD5.
The no variant of this disables the authentication key assigned previously using
ntp authentication-key.
Syntax ntp authentication-key <keynumber> md5 <key>
no ntp authentication-key <keynumber> md5 <key>
Mode Global Configuration
To define an authentication key number 134343 and a key value mystring, use
Examples
the commands:
awplus#
awplus(config)#
To disable the authentication key number 134343 with the key value mystring,
use the commands:
awplus#
awplus(config)#
C613-50077-01 REV A
Parameter Description
<keynumber>
<1-4294967295> The key number.
<key>
The authentication key.
configure terminal
ntp authentication-key 134343 md5 mystring
configure terminal
no ntp authentication-key 134343 md5 mystring
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
1926