Allied Telesis AT-AR3050S Command Reference Manual page 2308

IP C
SEC OMMANDS
(IP )
TUNNEL DESTINATION SEC
To configure a dynamic IP address for the tunnel destination, use the commands
below:
awplus#
awplus(config)#
awplus(config-if)#
awplus(config-if#
To remove the destination address of IPSec tunnel145, use the commands
below:
awplus#
awplus(config)#
awplus(config-if)#
Related tunnel source (IPsec)
Commands
C613-50077-01 REV A
configure terminal
interface tunnel145
tunnel mode ipsec ipv4
tunnel destination dynamic
configure terminal
interface tunnel145
no tunnel destination 192.0.3.1
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
2308