Allied Telesis AT-AR3050S Command Reference Manual page 1807

A T M F
LLIED ELESIS ANAGEMENT
-
SWITCHPORT ATMF CROSSLINK
Example 2B To make static aggregator sa1 an AMF crosslink, use the following commands for
good practice:
Node_1#
Node_1(config)#
Node_1(config-if)#
Node_1(config-if)#
Node_1(config-if)#
In this example VLAN 2 is assigned to the static aggregator, and the native VLAN
(VLAN 1) is explicitly excluded from the aggregated ports and the crosslink
assigned to it.
NOTE
aggregator and the crosslink.
Related show atmf links statistics
Commands
C613-50077-01 REV A
™ (AMF) C
RAMEWORK OMMANDS
configure terminal
interface sa1
: The AMF management and domain VLANs are automatically added to the
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
switchport atmf-crosslink
switchport trunk allowed vlan add 2
switchport trunk native vlan none
1807