IPS C
OMMANDS
IPS
ips
Overview
Use this command to configure IPS.
Use the no variant of this command to remove all IPS configuration.
Syntax
ips
Mode
Global Configuration
Usage
This command allows you to enter the IPS mode. The command prompt for this
mode is awplus(config-ips)#.
In the IPS mode, you can:
•
•
Examples
To configure IPS, use the commands:
awplus#
awplus(config)#
awplus(config-ips)#
To remove all IPS configuration, use the commands:
awplus#
awplus(config)#
C613-50077-01 REV A
no ips
Enable or disable IPS protection, see the
Configure an action for specified categories, see the
command.
configure terminal
ips
configure terminal
no ips
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
protect (IPS)
command.
category action (IPS)
2151