Show Traffic-Shaping - Allied Telesis AT-AR3050S Command Reference Manual

T S C
RAFFIC HAPING OMMANDS
-
SHOW TRAFFIC SHAPING

show traffic-shaping

Overview This command displays a summary of the traffic-shaping configuration on your
device. It shows if shaping is enabled, how many rules are configured and how
many interfaces have virtual-bandwidth configured.
show traffic-shaping
Syntax
Default None
Mode Privileged Exec
Examples To show traffic-shaping configuration summary, use the following commands:
awplus#show traffic-shaping
Output Figure 54-3: Example output from the show traffic shaping command:
Related rule (Traffic Shaping)
Commands
show running-config traffic-shaping
virtual-bandwidth interface rate
C613-50077-01 REV A
Traffic shaping is enabled 
5 rules configured (5 valid rules) 
Virtual-bandwidth configured on 1 interfaces
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
2243