Egress-Vlan-Id - Allied Telesis AT-AR3050S Command Reference Manual

L RADIUS S C
OCAL ERVER OMMANDS
- -
EGRESS VLAN ID

egress-vlan-id

Overview Use this command to configure the standard RADIUS attribute "Egress-VLANID
(56)" for the local RADIUS Server user group.
Use the no variant of this command to remove the Egress-VLANID attribute from
the local RADIUS server user group.
Syntax egress-vlan-id <vid> [tagged|untagged]
no egress-vlan-id
Default By default, no Egress-VLANID attributes are configured.
Mode RADIUS Server Group Configuration
Examples To set the "Egress-VLANID" attribute for the NormalUsers local RADIUS server user
group to VLAN identifier 200, with tagged frames, use the commands:
awplus#
awplus(config)#
awplus(config-radsrv)#
awplus(config-radsrv-group)#
To remove the "Egress-VLANID" attribute for the NormalUsers local RADIUS server
user group, use the commands:
awplus#
awplus(config)#
awplus(config-radsrv)#
awplus(config-radsrv-group)#
Related attribute
Commands
egress-vlan-name
C613-50077-01 REV A
Parameter Description
<vid>
The VLAN identifier to be used for the Egress VLANID attribute, in
the range 1 to 4094.
tagged
Set frames on the VLAN as tagged. This sets the tag indication field
to indicate that all frames on this VLAN are tagged.
untagged
Set all frames on the VLAN as untagged. This sets the tag indication
field to indicate that all frames on this VLAN are untagged.
configure terminal
radius-server local
configure terminal
radius-server local
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
group NormalUsers
egress-vlan-id 200 tagged
group NormalUsers
no egress-vlan-id
1614