Show Counter Ntp - Allied Telesis AT-AR3050S Command Reference Manual

NTP C
OMMANDS

SHOW COUNTER NTP

show counter ntp
Overview This command displays packet counters for NTP.
show counter ntp
Syntax
Mode User Exec and Privileged Exec
Example To display counters for NTP use the command:
awplus#
Figure 39-1: Example output from show counter ntp
Table 39-1: Parameters in the output from show counter ntp
C613-50077-01 REV A
show counter ntp
NTP counters
Pkts Sent
Pkts Received
Pkts Processed
Pkts current version
Pkts old version
Pkts unknown version
Pkts access denied
Pkts bad length
Pkts bad auth
Pkts rate exceed
Parameter Description
Pkts Sent
Total number of NTP client and server packets sent by your
device.
Pkts Received
Total number of NTP client and server packets received by your
device.
Pkts Processed
The number of packets processed by NTP. NTP processes a
packet once it has determined that the packet is valid by
checking factors such as the packet's authentication, format,
access rights and version.
Pkts current
The number of version 4 NTP packets received.
version
Pkts old
The number of NTP packets received that are from an older
version
version, down to version 1, of NTP. NTP is compatible with these
versions and processes these packets.
Pkts unknown
The number of NTP packets received that are an earlier version
version
than version 1, or a higher version than version 4. NTP cannot
process these packets.
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
......... 0
......... 70958
......... 0
......... 0
......... 0
......... 0
......... 70958
......... 0
......... 0
......... 0
1936