Crypto Isakmp Key - Allied Telesis AT-AR3050S Command Reference Manual

GRE T C
UNNELING OMMANDS

CRYPTO ISAKMP KEY

crypto isakmp key
Overview Use this command to configure a pre-shared authentication key.
Pre-shared key authentication uses optionally encrypted shared keys identified by
hostname, IPv4 or IPv6 address. Pre-shared keys are not viewable and stored
encrypted in the running-configuration.
You must configure this key whenever you specify pre-shared keys in an (Internet
Key Exchange) IKE policy and at both peers.
To use the no variant to remove a previously created pre-shared key.
crypto isakmp key [8] <key> {hostname <host-name>|address
Syntax
{<ipv4-addr>|<ipv6-addr>}}
no crypto isakmp key [8] <key> {hostname <host-name>|address
{<ipv4-addr>|<ipv6-addr>}
Default ISAKMP keys do not exist.
Mode Global Configuration
Examples To configure a pre-shared authentication key for a destination host, use the
commands below:
awplus#
awplus(config)#
mypeer@my.domain.com
C613-50077-01 REV A
Parameter Description
crypto
Security specific command.
isakmp
Internet Security Association Key Management Protocol provides a
common framework for key management implementations.
key
Pre-shared key.
<key>
Specify the pre-shared key. Us any combination of alphanumeric
characters up to 128 bytes.
8
Specifies that an encrypted key follows.
<host-name>
Destination hostname.
<ipv4-addr>
Destination IPv4 address. The IPv4 address uses the
format A.B.C.D.
<ipv6-addr>
Destination IPv6 address. The IPv4 address uses the
format X:X::X:X.
configure terminal
crypto isakmp key friend hostname
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
2322