Type Cpu - Allied Telesis AT-AR3050S Command Reference Manual

T C
RIGGER OMMANDS

TYPE CPU

type cpu
Overview This command configures a trigger to activate based on CPU usage level. Selecting
the up option causes the trigger to activate when the CPU usage exceeds the
specified usage level. Selecting the down option causes the trigger to activate
when CPU usage drops below the specified usage level. Selecting any causes the
trigger to activate in both situations. The default is any.
type cpu <1-100> [up|down|any]
Syntax
Mode Trigger Configuration
Usage For an example trigger configuration that uses the type cpu command, see
"Capture Unusual CPU and RAM Activity" in the
Configuration
To configure trigger 28 to be a CPU trigger that activates when CPU usage exceeds
Examples
80% use the following commands:
awplus#
awplus(config)#
awplus(config-trigger)#
To configure trigger 5 to be a CPU trigger that activates when CPU usage either
rises above or drops below 65%, use the following commands:
awplus#
awplus(config)#
awplus(config-trigger)#
or
awplus#
awplus(config)#
awplus(config-trigger)#
Related show trigger
Commands
trigger
C613-50077-01 REV A
Parameter Description
<1-100>
The percentage of CPU usage at which to trigger.
up
Activate when CPU usage exceeds the specified level.
down
Activate when CPU usage drops below the specified level
any
Activate when CPU usage passes the specified level in either
direction
Guide.
configure terminal
trigger 28
configure terminal
trigger 5
configure terminal
trigger 5
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
Triggers Feature Overview and
type cpu 80 up
type cpu 65
type cpu 65 any
2063