Atmf Backup Area-Masters Now - Allied Telesis AT-AR3050S Command Reference Manual

A T M F
LLIED ELESIS ANAGEMENT
-
ATMF BACKUP AREA MASTERS NOW

atmf backup area-masters now

Overview Use this command to run a backup of one or more remote area-masters from the
AMF controller immediately. This command is only valid on AMF controllers.
atmf backup area-masters now [area <area-name>|area <area-name>
Syntax
node <node-name>]
Mode Privileged Exec
Example To back up all local master nodes in all areas controlled by controller-1, use the
command
controller-1#
To back up all local masters in the Wellington area, use the command
controller-1#
To back up the local master "well-master" in the Wellington area, use the
command
controller-1#
well-master
Related atmf backup area-masters enable
Commands
atmf backup area-masters synchronize
show atmf backup area
C613-50077-01 REV A
™ (AMF) C
RAMEWORK OMMANDS
Parameter Description
<area-name>
The area whose area-masters will be backed up.
<node-name>
The node that will be backed up.
atmf backup area-masters now
atmf backup area-masters now area Wellington
atmf backup area-masters now area Wellington node
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
1694