Atmf Group (Membership) - Allied Telesis AT-AR3050S Command Reference Manual

A T M F
LLIED ELESIS ANAGEMENT
( )
ATMF GROUP MEMBERSHIP

atmf group (membership)

Overview This command configures a device to be a member of one or more AMF groups.
Groups exist in three forms: Implicit Groups, Automatic Groups, and User-defined
Groups.
•
Note that the Implicit Groups do not appear in show group output.
•
•
Each node in the AMF is automatically assigned membership to the implicit
groups, and the automatic groups that are appropriate to its node type, e.g. x610,
PoE. Similarly, nodes that are configured as masters are automatically assigned to
the master group.
Use the no variant of this command to remove the membership.
atmf group <group-list>
Syntax
no atmf group <group-list>
Mode Global Configuration
Usage You can use this command to define your own arbitrary groups of AMF members
based on your own network's configuration requirements. Applying a node to a
non existing group will result in the group automatically being created.
Note that the master nodes are automatically assigned to be members of the
pre-existing master group.
The following example configures the device to be members of three groups; two
are company departments, and one comprises all devices located in building_2. To
avoid having to run this command separately on each device that is to be added to
these groups, you can remotely assign all of these devices to a working-set, then
use the capabilities of the working-set to apply the
command to all members of the working set.
C613-50077-01 REV A
™ (AMF) C
RAMEWORK OMMANDS
Implicit Groups
– all: All nodes in the AMF
– current: The current working-set
– local: The originating node.
Automatic Groups - These are defined by hardware architecture, e.g. x510,
x610, x8100, AR3050S, AR4050S.
User-defined Groups - These enable you to define arbitrary groups of AMF
members based on your own criteria.
Parameter Description
<group-list>
A list of group names. These should be entered as a comma
delimited list without spaces.
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
atmf group (membership)
1713