Protect (Web Control) - Allied Telesis AT-AR3050S Command Reference Manual

W C C
EB ONTROL OMMANDS
(W C )
PROTECT EB ONTROL

protect (Web Control)

Overview Use this command to enable Web Control protection.
Use the no variant of this command to disable Web Control protection without
losing existing Web Control configuration.
Syntax protect
no protect
Default Web Control protection is disabled by default.
Mode Web Control Configuration
Usage Web Control protection is disabled and all HTTP traffic is allowed by default. You
must issue the
provider before using this command.
Examples To enable Web Protection protection, use the commands:
awplus#
awplus(config)#
awplus(config-web-control)#
awplus(config-web-control)#
To disable Web Control protection, use the commands:
awplus#
awplus(config)#
awplus(config-web-control)#
Validation show web-control
commands
Related provider digitalarts
commands
C613-50077-01 REV A
provider digitalarts
configure terminal
web-control
configure terminal
web-control
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
command to configure the categorization
provider digitalarts
protect
no protect
2201