Allied Telesis AT-AR3050S Command Reference Manual page 1757

A T M F
LLIED ELESIS ANAGEMENT
SHOW ATMF
Table 4: Parameter definitions from the show atmf tech command (cont.)
Parameter
Node Name
Role
Current ATMF
Nodes
Node Address
Node ID
Node Depth
Domain State
Recovery State
Management VLAN
Domain VLAN
Device Type
ATMF Master
SC
Parent
Node Depth
Related show atmf detail
Commands
C613-50077-01 REV A
™ (AMF) C
RAMEWORK OMMANDS
Definition
The name assigned to a particular node.
The role configured for this AMF device, either Master or Member.
The count of AMF nodes in an AMF Network.
An address used to access a remotely located node (.atmf).
A unique identifier assigned to a Node on an AMF network.
The number of nodes in path from this node to level of the AMF root node. It can be
thought of as the vertical depth of the AMF network from a particular node to the
zero level of the AMF root node.
The state of Node in a Domain in AMF network as Controller/Backup.
The AMF node recovery status. Indicates whether a node recovery is in progress on
this device - Auto, Manual, or None.
The VLAN created for traffic between Nodes of different domain (up/down links).
• VLAN ID - In this example VLAN 4092 is configured as the Management VLAN.
• Management Subnet - Network prefix for the subnet.
• Management IP Address - The IP address allocated for this traffic.
• Management Mask - The subnet mask used to create a subnet for this traffic
(255.255.128.0).
The VLAN assigned for traffic between Nodes of same domain (crosslink).
• VLAN ID - In this example VLAN 4091 is configured as the domain VLAN.
• Domain Subnet. The subnet address used for this traffic.
• Domain IP Address. The IP address allocated for this traffic.
• Domain Mask. The subnet mask used to create a subnet for this traffic
(255.255.128.0).
The Product Series name.
Whether the node is an AMF master node for its area ('Y' if it is and 'N' if it is not).
The device configuration, one of C - Chassis (SBx8100 Series), S - Stackable (VCS) or N
- Standalone.
The node to which the current node has an active uplink.
The number of nodes in the path from this node to the master node.
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
1757