Allied Telesis AT-AR3050S Command Reference Manual page 1902

DHCP IP 6 (DHCP 6) C
FOR V V OMMANDS
6
IPV LOCAL POOL
Once a pool is configured, it cannot be changed. To change the configuration, you
must remove then recreate a IPv6 prefix pool. All IPv6 prefixes already allocated are
also freed.
Examples To create a local DHCPv6 local pool named P2 with the IPv6 prefix and prefix length
2001:0db8::/32 with an assigned length of 64, use the following commands:
awplus#
awplus(config)#
To remove a configured DHCPv6 local pool, use the following commands:
awplus#
awplus(config)#
Related ipv6 dhcp pool
Commands
show ipv6 dhcp pool
C613-50077-01 REV A
configure terminal
ipv6 local pool P2 2001:0db8::/32 64
configure terminal
no ipv6 local pool
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
1902