Update-Interval (Ip Reputation) - Allied Telesis AT-AR3050S Command Reference Manual

IP R C
EPUTATION OMMANDS
- (IP R
UPDATE INTERVAL EPUTATION

update-interval (IP Reputation)

Overview Use this command to configure an update check interval for the IP Reputation
resource files.
Use the no variant of this command to restore the default update check interval to
1 hour.
Syntax update-interval {minutes <10-525600>|hours <1-8760>|days
<1-365>|weeks <1-52>|never}
no update-interval
Default The default update interval is 1 hour.
Mode IP Reputation Mode
Usage The Update Manager will perform an update check for a resource when triggered
by an update check interval. It will request the current version number of the
resource from the Update Server, then compare it with the current local version. If
they are different, the Update Manager will initiate an update of the local resource.
Note that when a feature is disabled, regular and manual update checks for its
resources are disabled.
Also note that an update check for a resource will not proceed if an update of that
resource is already in progress.
Examples To check and update the IP Reputation resource files once a week, use the
following command:
awplus(config-ip-reputation)#
To disable updating of the resource, use the following command:
awplus(config-ip-repuation)#
To restore the default update interval, which is 1 hour, use the following command:
awplus(config-ip-reputation)#
C613-50077-01 REV A
)
Parameter
minutes <10-525600>
hours <1-8760>
days <1-365>
weeks <1-52>
never
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
Description
Update interval from 10 through 52600 minutes
Update interval from 1 hour through 8760 hours
Update interval from 1 day through 365 days
Update interval from 1 week through 52 weeks
Never update the resource. If IP Reputation
becomes enabled, the Update Manager will do
update check and update the resource files if
needed. Use the protect (IP Reputation)
to enable IP Reputation.
update-interval weeks 1
update-interval never
no update-interval
command
2234