Allied Telesis AT-AR3050S Command Reference Manual page 1797

A T M F
LLIED ELESIS ANAGEMENT
SHOW ATMF TECH
Table 50: Parameter definitions from the show atmf tech command (cont.)
Parameter
Role
Current ATMF Nodes
Node Address
Node ID
Node Depth
Domain State
Recovery State
Management VLAN
Domain VLAN
Device Type
ATMF Master
SC
Parent
Node Depth
NOTE
only the most significant terms are defined in this table.
C613-50077-01 REV A
™ (AMF) C
RAMEWORK OMMANDS
Definition
The role configured on the device within the AMF - either master or member.
A count of the AMF nodes in the AMF network.
The identity of a node (in the format name.atmf ) that enables its access it from a
remote location.
A unique identifier assigned to an AMF node.
The number of nodes in path from this node to the core domain.
A node's state within an AMF Domain - either controller or backup.
The AMF node recovery status. Indicates whether a node recovery is in progress
on this device - either Auto, Manual, or None.
The VLAN created for traffic between nodes of different domains (up/down
links).
VLAN ID - In this example VLAN 4092 is configured as the Management VLAN.
Management Subnet - the Network prefix for the subnet.
Management IP Address - the IP address allocated for this traffic.
Management Mask - the Netmask used to create a subnet for this traffic
255.255.128.0 (= prefix /17)
The VLAN assigned for traffic between Nodes of same domain (crosslink).
VLAN ID - In this example VLAN 4091 is configured as the domain VLAN.
Domain Subnet - the Subnet address used for this traffic.
Domain IP Address - the IP address allocated for this traffic.
Domain Mask - the Netmask used to create a subnet for this traffic 255.255.128.0
(= prefix /17)
Shows the Product Series Name.
Indicates the nodes membership of the core domain (membership is indicated
by Y)
Shows switch configuration:
• C - Chassis (such as SBx8100 series)
• S - Stackable (VCS)
• N - Standalone
A node to which connects to the present node's uplink, i.e. one layer higher in
the hierarchy.
Shows the number of nodes in path from the current node to the Core domain.
: The show atmf tech command can produce very large output. For this reason
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
1797