Allied Telesis AT-AR3050S Command Reference Manual page 1879

DHCP IP 6 (DHCP 6) C
FOR V V OMMANDS
ADDRESS RANGE
An IPv6 address or prefix becomes invalid and is not available to an interface when
the valid lifetime timer expires. Invalid addresses or prefixes should not appear as
the source or destination for a packet.
To add the IPv6 address range 2001:0db8:1::1 to 2001:0db8:1fff::1 for
Examples
DHCPv6 server pool configuration, use the following commands:
awplus#
awplus(config)#
awplus(config-dhcp6)#
2001:0db8:1fff::1
To remove a configured IPv6 address range for DHCPv6 server pool configuration,
use the following commands:
awplus#
awplus(config)#
awplus(config-dhcp6)#
Related address prefix
Commands
ipv6 dhcp pool
Validation show ipv6 dhcp binding
Commands
show ipv6 dhcp pool
C613-50077-01 REV A
configure terminal
ipv6 dhcp pool pool1
address range 2001:0db8:1::1
configure terminal
ipv6 dhcp pool pool1
no address range
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
1879