Dpi - Allied Telesis AT-AR3050S Command Reference Manual

A C C
PPLICATION ONTROL OMMANDS

DPI

dpi
Overview Use this command to configure DPI.
Use the no variant of this command to remove all DPI configuration.
Syntax dpi
no dpi
Mode Global Configuration
Usage This command allows you to enter the DPI mode. The command prompt for this
mode is awplus(config-dpi)#.
In the DPI mode, you can:
•
•
Examples To configure DPI, use the commands:
awplus#
awplus(config)#
awplus(config-dpi)#
To remove all DPI configuration, use the commands:
awplus#
awplus(config)#
C613-50077-01 REV A
Set the DPI provider, see the
Enable DPI, see the enable (DPI)
configure terminal
dpi
configure terminal
no dpi
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
provider procera command.
command.
2215