Show Crypto Key Userkey - Allied Telesis AT-AR3050S Command Reference Manual

S S (SSH) C
ECURE HELL OMMANDS

SHOW CRYPTO KEY USERKEY

show crypto key userkey
Overview This command displays the public keys created on this device for the specified SSH
user.
show crypto key userkey <username> [dsa|rsa|rsa1]
Syntax
Mode User Exec, Privileged Exec and Global Configuration
Examples To show the public key generated for the user, use the command:
awplus#
To store the RSA public key generated for the user manager to the file "user.pub",
use the command:
awplus#
Output Figure 42-4: Example output from the show crypto key userkey command
Table 4: Parameters in the output of the show crypto key userkey command
Related crypto key generate userkey
Commands
C613-50077-01 REV A
Parameter Description
<username>
User name of the local SSH user whose keys you wish to display. The
username must begin with a letter. Valid characters are all numbers,
letters, and the underscore, hyphen and full stop symbols.
dsa
Displays the DSA public key.
rsa
Displays the RSA public key used for SSH version 2 connections.
rsa1
Displays the RSA key used for SSH version 1 connections.
show crypto key userkey manager
show crypto key userkey manager rsa > manager-rsa.pub
Type Bits Fingerprint
-------------------------------------------------------------
rsa 2048 e8:d6:1b:c0:f4:b6:e6:7d:02:2e:a9:d4:a1:ca:3b:11
rsa1 1024 12:25:60:95:64:08:8e:a1:8c:3c:45:1b:44:b9:33:9b
Parameter Description
Type
The algorithm used to generate the key.
Bits
Length in bits of the key.
Fingerprint
Checksum value for the key.
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
2008