Ip Address (Entity) - Allied Telesis AT-AR3050S Command Reference Manual

A E C
PPLICATION AND NTITY OMMANDS
(E )
IP ADDRESS NTITY

ip address (Entity)

Overview Use this command to assign an IPv4 address to a host entity.
Use the no variant of this command to remove an IPv4 address from the host.
Syntax ip address <ipv4-address>
ip address dynamic interface <interface_name>
no ip address <ipv4-address>
no ip address dynamic interface <interface_name>
Mode Host Mode
Usage You can add multiple IP addresses to a host entity. If the IP address is not in the
scope of any of its parent network's IPv4 subnets, a warning message will be given.
Such an IP address is still acceptable because in the future the user may assign a
network subnet that contains the host's IP address. Firewall policy rules will not
apply to an IP address that is not in at least one of the network's subnets.
To add an IP address to host ftp, use the commands:
Examples
awplus#
awplus(config)#
awplus(config-zone)#
awplus(config-network)#
awplus(config-network)#
awplus(config-host)#
To add multiple IP addresses to host ftp, use the commands:
awplus#
awplus(config)#
awplus(config-zone)#
awplus(config-network)#
awplus(config-network)#
awplus(config-host)#
awplus(config-host)#
awplus(config-host)#
C613-50077-01 REV A
Parameter
<ipv4-address>
dynamic
<interface_name>
configure terminal
zone dmz
configure terminal
zone dmz
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
Description
The IPv4 address uses the format A.B.C.D.
Dynamic IP address, for example, obtained from a DHCP
server.
Interface to acquire IP addresses from.
network servers
ip subnet 192.168.1.0/24
host ftp
ip address 192.168.1.5
network servers
ip subnet 192.168.1.0/24
host ftp
ip address 192.168.1.8
ip address 192.168.1.9
ip address 192.168.1.10
2127