Ssh Server - Allied Telesis AT-AR3050S Command Reference Manual

S S (SSH) C
ECURE HELL OMMANDS

SSH SERVER

ssh server
Overview This command modifies the configuration of the SSH server. Changing these
parameters affects new SSH sessions connecting to the device.
The no variant of this command restores the configuration of a specified
parameter to its default. The change affects the SSH server immediately if the
server is running. Otherwise, the configuration is used when the server starts.
To enable the SSH server, use the
ssh server {[v1v2|v2only]|<1-65535>}
Syntax
ssh server {[session-timeout <0-3600>] [login-timeout <1-600>]
[max-startups <1-128>]}
no ssh server {[session-timeout] [login-timeout]
[max-startups]}
Mode Global Configuration
C613-50077-01 REV A
Parameter Description
v1v2
Supports both SSHv2 and SSHv1client connections.
Default: v1v2
v2only
Supports SSHv2 client connections only.
<1-65535>
The TCP port number that the server listens to for incoming SSH
sessions.
Default: 22
session-
There is a maximum time period that the server waits before deciding
timeout
that a session is inactive and should be terminated. The server
considers the session inactive when it has not received any data from
the client, and when the client does not respond to keep alive
messages.
Default: 0 (session timer remains off ).
<0-3600>
login-
The maximum time period the server waits before disconnecting an
timeout
unauthenticated client.
Default: 60
<1-600>
max-
The maximum number of concurrent unauthenticated connections
startups
the server accepts. When the number of SSH connections awaiting
authentication reaches the limit, the server drops any additional
connections until authentication succeeds or the login timer expires
for a connection.
Default: 10
<1-128>
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
service ssh command.
Timeout in seconds.
Timeout in seconds.
Number of sessions.
2022