Allied Telesis AT-AR3050S Command Reference Manual page 1890

DHCP IP 6 (DHCP 6) C
FOR V V OMMANDS
6 (DHCP 6 PD)
IPV ADDRESS V
To configure a PD prefix named prefix1 on interface vlan1 and then add an IPv6
address using EUI-64 identifiers, use the following commands:
awplus#
awplus(config)#
awplus(config-if)#
awplus(config-if)#
awplus(config-if)#
In this example, the prefix will be assigned from the pool on the PD client. The host
portion or suffix is created from the EUI-64 identifier of the interface for the last 64
bits.
To assign the IPv6 address 2001:0db8::a2/48 to the VLAN interface vlan2, use the
following commands:
awplus#
awplus(config)#
awplus(config-if)#
To remove the IPv6 address 2001:0db8::a2/48 from the VLAN interface vlan2, use
the following commands:
awplus#
awplus(config)#
awplus(config-if)#
To assign the IPv6 address to the PPP interface ppp0, use the following
commands:
awplus#
awplus(config)#
awplus(config-fr-subif)#
To remove the IPv6 address 2001:0db8::a2/64 from the PPP interface ppp0, use the
following commands:
awplus#
awplus(config)#
awplus(config-if)#
To assign the eui64 derived address in the prefix 2001:db8::/64 to VLAN
interface vlan2, use the following commands:
awplus#
awplus(config)#
awplus(config-if)#
C613-50077-01 REV A
configure terminal
interface vlan1
ipv6 enable
ipv6 dhcp client pd prefix1
ipv6 address prefix1/64 eui64
configure terminal
interface vlan2
ipv6 address 2001:0db8::a2/48
configure terminal
interface vlan2
no ipv6 address 2001:0db8::a2/48
configure terminal
interface ppp0
configure terminal
interface ppp0
no ipv6 address 2001:0db8::a2/64
configure terminal
interface vlan2
ipv6 address 2001:0db8::/64 eui64
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
ipv6 address 2001:0db8::a2/64
1890