Radius Commands; Introduction; Chapter 32: Radius Commands - Allied Telesis AT-AR3050S Command Reference Manual

32

Introduction

Overview This chapter provides an alphabetical reference for commands used to configure
the device to use RADIUS servers.
Command List •
•
•
•
•
•
•
•
•
•
•
•
C613-50077-01 REV A

RADIUS Commands

"deadtime (RADIUS server
"debug radius" on page 1577
"ip radius source-interface" on page 1578
"radius-server deadtime" on page 1579
"radius-server host" on page 1580
"radius-server key" on page 1583
"radius-server retransmit" on page 1584
"radius-server timeout" on page 1586
"server (Server Group)" on page 1588
"show debugging radius" on page 1590
"show radius" on page 1591
"undebug radius" on page 1594
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
group)" on page 1576
1575