Mac-Filter - Allied Telesis AT-AR3050S Command Reference Manual

B C
RIDGING OMMANDS
-
MAC FILTER

mac-filter

Overview This command creates a Layer 2 MAC filter that can be applied on a bridge.
Use the no variant of this command to remove the MAC filter.
Syntax mac-filter [<mac-filter-name>]
no mac-filter [<mac-filter-name>]
Default None
Mode Interface Configuration
Usage You can only create one MAC filter at one time.
Examples To create a mac-filter with the name of ATL-router1,use the following commands:
awplus#configure terminal
awplus(config)#mac-filter ATL-router1
To delete a mac-filter, use the following commands:
awplus#configure terminal
awplus(config)#no mac-filter ATL-router1
Output None
Related clear mac-filter
Commands
mac-filter-group
show mac-filter
C613-50077-01 REV A
Parameter
<mac-filter-name>
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
Description
The name of the mac-filter (maximum of 16 characters).
2261