Atmf Backup Area-Masters Delete - Allied Telesis AT-AR3050S Command Reference Manual

A T M F
LLIED ELESIS ANAGEMENT
-
ATMF BACKUP AREA MASTERS DELETE

atmf backup area-masters delete

Overview Use this command to delete a backup of a specified node in a specified area. This
command is only valid on AMF controllers.
atmf backup area-masters delete area <area-name> node
Syntax
<node-name>
Mode Privileged Exec
Example To delete the backup of the remote area-master named "well-gate" in the area
Wellington, use the command:
controller-1#
node well-gate
Related show atmf backup area
Commands
C613-50077-01 REV A
™ (AMF) C
RAMEWORK OMMANDS
Parameter Description
<area-name>
The area that contains the node whose backup will be deleted.
<node-name>
The node whose backup will be deleted.
atmf backup area-masters delete area Wellington
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
1692