Show Isakmp Peer - Allied Telesis AT-AR3050S Command Reference Manual

IP C
SEC OMMANDS

SHOW ISAKMP PEER

show isakmp peer
Overview Use this command to show ISAKMP profile and key status for ISAKMP peers.
show isakmp peer [<host-name>|<ipv4-addr>|<ipv6-addr>]
Syntax
Mode Privileged Exec
Examples To show ISAKMP profile and key status for ISAKMP peers, use the following
command:
awplus#
Output Figure 57-12: Example output from the show isakmp peer command
awplus#show isakmp peer
Peer
--------------------------------------------------------------------------------
example.com
2.2.2.2
1.1.1.1
Related crypto isakmp peer
Commands
C613-50077-01 REV A
Parameter Description
<host-name>
Destination hostname.
<ipv4-addr>
Destination IPv4 address. The IPv4 address uses the
format A.B.C.D.
<ipv6-addr>
Destination IPv6 address. The IPv6 address uses the
format X:X::X:X.
show isakmp peer
Profile (* incomplete)
LEGACY
default
SECURE
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
Key
Not Found
PSK
PSK
2300