Show Ipv6 Dhcp Binding - Allied Telesis AT-AR3050S Command Reference Manual

DHCP IP 6 (DHCP 6) C
FOR V V OMMANDS
6
SHOW IPV DHCP BINDING

show ipv6 dhcp binding

Overview Use this command in User Exec or Privileged Exec mode to show the IPv6 address
entries that the DHCPv6 server leases to DHCPv6 clients. Note that applying this
command with the optional summary keyword parameter displays the number of
addresses per pool, but not the address or prefix entries per pool.
For information on filtering and saving command output, see "Controlling "show"
Command Output" in the
and Configuration
show ipv6 dhcp binding [summary]
Syntax
Mode User Exec and Privileged Exec
Example 1 To display the total DHCPv6 leasing address entries for all pools, use the command:
awplus#
Output Figure 38-5: Example output from the show ipv6 dhcp binding summary
Table 3: Parameters in the output of the show ipv6 dhcp binding summary
C613-50077-01 REV A
Guide.
Parameter Description
summary
Optional. Specify the summary keyword to display summarized
information for DHCPv6 server leases to client nodes, displaying the
number of address entries per pool, not the addresses or prefixes.
show ipv6 dhcp binding summary
command
awplus# show ipv6 dhcp binding summary
Pool Name
----------------------------------------------------
ia-na1
ia-pd1

Total in all Pools:
command
Parameter Description
Pool Name
Displays a list of all the pool names.
Number of
Displays the number of leased address entries for the pool.
Leased
Addresses
Total in all
Displays the total number of leased address entries for all pools.
Pools
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
"Getting Started with AlliedWare Plus" Feature Overview
Number of Leased Addresses
3
5
8
1916