Allied Telesis AT-AR3050S Command Reference Manual page 1945

SNMP C
OMMANDS
-
SHOW COUNTER SNMP SERVER
Table 1: Parameters in the output of the show counter snmp-server command
C613-50077-01 REV A
Parameter
inPkts
inBadVersions
inBadCommunityNames
inBadCommunityUses
inASNParseErrs
inTooBigs
inNoSuchNames
inBadValues
inReadOnlys
inGenErrs
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
Meaning
The total number of SNMP messages received by the
SNMP agent.
The number of messages received by the SNMP agent
for an unsupported SNMP version. It drops these
messages.The SNMP agent on your device supports
versions 1, 2C, and 3.
The number of messages received by the SNMP agent
with an unrecognized SNMP community name. It
drops these messages.
The number of messages received by the SNMP agent
where the requested SNMP operation is not permitted
from SNMP managers using the SNMP community
named in the message.
The number of ASN.1 or BER errors that the SNMP
agent has encountered when decoding received SNMP
Messages.
The number of SNMP PDUs received by the SNMP
agent where the value of the error-status field is
'tooBig' . This is sent by an SNMP manager to indicate
that an exception occurred when processing a request
from the agent.
The number of SNMP PDUs received by the SNMP
agent where the value of the error-status field is
'noSuchName' . This is sent by an SNMP manager to
indicate that an exception occurred when processing a
request from the agent.
The number of SNMP PDUs received by the SNMP
agent where the value of the error-status field is
'badValue' . This is sent by an SNMP manager to indicate
that an exception occurred when processing a request
from the agent.
The number of valid SNMP PDUs received by the SNMP
agent where the value of the error-status field is
'readOnly' . The SNMP manager should not generate a
PDU which contains the value 'readOnly' in the error-
status field. This indicates that there is an incorrect
implementations of the SNMP.
The number of SNMP PDUs received by the SNMP
agent where the value of the error-status field is
'genErr' .
1945