Show Traffic-Shaping Rule - Allied Telesis AT-AR3050S Command Reference Manual

T S C
RAFFIC HAPING OMMANDS
-
SHOW TRAFFIC SHAPING RULE

show traffic-shaping rule

Overview This command displays details about all configured traffic shaping rules. You can
also specify rules that you want to display.
show traffic-shaping rule [<10-9999>]
Syntax
Default None
Mode Privileged Exec
Examples To show all traffic-shaping rules details, use the following commands:
awplus#show traffic-shaping rule
To show traffic-shaping rule 30 details, use the following commands:
awplus#show traffic-shaping rule 30
Output Figure 54-6: Example output from the show traffic-shaping rule command
awplus#show traffic-shaping rule 

[* = Rule is not valid - see "show traffic-shaping rule config-check"] 
ID App
------------------------------------------------------------------------------ 
10 any
15 any
20 any
30 any
50 any

Showing rule 30: 
awplus#show traffic-shaping rule 30 

[* = Rule is not valid - see "show traffic-shaping rule config-check"] 
ID App
---------------------------------------------------------------------------- 
30 any
Related rule (Traffic Shaping)
Commands
show running-config traffic-shaping
show traffic-shaping
C613-50077-01 REV A
Parameter Description
<10-65535>
The ID of the rule whose counters should be displayed.
From To
common wan
health wan
health common
common common
wan common
From To
common common
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
Priority 
Rate Max
5000 5000
3000 5000
2000 2000
10000 10000
1000 5000
Rate Ceiling
10000 10000
4 
2 
7 
4 
1 
Priority 
4
2246