Debug Firewall - Allied Telesis AT-AR3050S Command Reference Manual

F C
IREWALL OMMANDS

DEBUG FIREWALL

debug firewall
Overview Use this command to enable firewall debugging and Network Address Translation
(NAT) debugging. This will cause additional detailed debugging information to be
logged at the "informational" and "debugging" levels.
Use the no variant of this command to disable firewall debugging and NAT
debugging.
For more information about NAT, see the
Feature Overview and Configuration
debug firewall
Syntax
no debug firewall
Default Firewall debugging and NAT debugging are disabled by default.
Mode Privileged Exec
Examples To enable firewall debugging and NAT debugging, use the command:
awplus#
To disable firewall debugging and NAT debugging, use the command:
awplus#
Validation show debugging firewall
commands
C613-50077-01 REV A
debug firewall
no debug firewall
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
Network Address Translation (NAT)
Guide.
2101