Show Ipsec Sa - Allied Telesis AT-AR3050S Command Reference Manual

IP C
SEC OMMANDS

SHOW IPSEC SA

show ipsec sa
Overview Use this command to view the settings used by current security associations. SAs
specify the Security Parameter Index (SPI), protocols, algorithms and keys for
protecting a single flow of traffic between two IPSec peers. For more information
about SA, see the
Configuration
show [crypto] ipsec sa
Syntax
Mode Privileged Exec
Examples To view the settings used by current security associations, enter the command
below:
awplus#
Output Figure 57-9: Example output from the show ipsec sa command
awplus#show ipsec sa
-----------------------------------------------------------------------------
Peer
-----------------------------------------------------------------------------
10.0.0.20
10.0.0.22
10.0.0.25
C613-50077-01 REV A
Internet Protocol Security (IPSec) Feature Overview and
Guide.
Parameter Description
crypto
Security specific command.
ipsec
Internet Protocol Security defines the protection of IP packets
using encryption and authentication.
sa
Security Association.
show ipsec sa
SPI (in:out)
Encryption
c2d8c150:7b24d3f5
AES256
c6c2ad0d:0d008e3d
3DES
cb36f9dd:cd87a834
AES128
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
Mode Proto
Integrity PFS
tunnel ESP
SHA256 -
tunnel ESP
SHA1 -
tunnel ESP
SHA1 2
Expires
28786s
3582s
28778s
2297