Show Antivirus - Allied Telesis AT-AR3050S Command Reference Manual

A C
NTIVIRUS OMMANDS

SHOW ANTIVIRUS

show antivirus
Overview Use this command to show the information about the operation of Antivirus.
show antivirus
Syntax
Mode Privileged Exec
Examples To show the operation of Antivirus, use the command:
awplus#
Output Figure 50-2: Example output from the show antivirus command on the console
Figure 50-3: Example output from the show antivirus command on the console
C613-50077-01 REV A
show antivirus
if the subscription license of Antivirus is active.
Enabled (Active) 
Status:
Kaspersky 
Provider:
Scan failed action:
Limit exceeded action: block 
Resource version:
Resource update interval: 1 hour 
if the subscription license of Antivirus is inactive.
awplus#show antivirus 
Enabled (Inactive Unlicensed) 
Status:
Kaspersky 
Provider:
Scan failed action:
Limit exceeded action: block 
Resource version:
Resource update interval: 1 hour 
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
block 
1.0 
block 
not set 
2186