Allied Telesis AT-AR3050S Command Reference Manual page 1603

L RADIUS S C
OCAL ERVER OMMANDS
- - (
COPY FDB RADIUS USERS TO FILE
The name and password of the local RADIUS server users created use a MAC
address, which can be used for MAC authentication.
This command does not copy a MAC address learned by the CPU or the
management port.
This command can filter FDB entries by the interface name and the VLAN ID. When
the interface name and the VLAN ID are specified, this command generates local
RADIUS server users from only the MAC address learned on the specified interface
and on the specified VLAN.
Examples To register the local RADIUS server users from the local FDB directly to the local
RADIUS server, use the command:
awplus#
To register the local RADIUS server users from the interface port1.0.1 to the
local RADIUS server, use the command:
awplus#
port1.0.1
To copy output generated as local RADIUS server user data from MAC addresses
learned on vlan10 on interface port1.0.1 to the file radius-user.csv, use
the command:
awplus#
port1.0.1 vlan10
To copy output generated as local RADIUS server user data from MAC addresses
learned on vlan10 on interface port1.0.1 to a file on the remote file server,
use the command:
awplus#
vlan10
Related copy local-radius-user-db (to file)
Commands
copy local-radius-user-db (from file)
C613-50077-01 REV A
)
copy fdb-radius-users local-radius-user-db
copy fdb-radius-users local-radius-user-db interface
copy fdb-radius-users radius-user.csv interface
copy fdb-radius-users fserver interface port1.0.1
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
1603