Allied Telesis AT-AR3050S Command Reference Manual page 2051

T C
RIGGER OMMANDS
SHOW TRIGGER
Table 4: Parameters in the output of the show trigger full and show trigger
To display counter information about all triggers use the command:
awplus#
Figure 43-4: Example output from the show trigger counter command
C613-50077-01 REV A
commands for a specific trigger
Parameter Description
Trigger
The ID of the trigger.
Description
Descriptive name of the trigger.
Type and
The trigger type and its activation conditions.
details
Days
The days on which the trigger is permitted to activate.
Date
The date on which the trigger is permitted to activate. Only
displayed if configured, in which case it replaces "Days".
Active
Whether or not the trigger is permitted to activate.
Test
Whether or not the trigger is operating in diagnostic mode.
Trap
Whether or not the trigger is enabled to send SNMP traps.
Repeat
Whether the trigger repeats an unlimited number of times
(Continuous) or for a set number of times. When the trigger can
repeat only a set number of times, then the number of times
the trigger has been activated is displayed in brackets.
Modified
The date and time of the last time that the trigger was modified.
Number of
Number of times the trigger has been activated since the last
activations
restart of the device.
Last
The date and time of the last time that the trigger was
activation
activated.
Number of
How many scripts are associated with the trigger, followed by
scripts
the names of the script files in the order in which they run.
show trigger counter
awplus#show trigger counter
Trigger Module Counters
------------------------------------------------------
Trigger activations ........................... 0
Time triggers activated today ................. 0
Periodic triggers activated today ............. 0
Interface triggers activated today ............ 0
Resource triggers activated today ............. 0
Reboot triggers activated today ............... 0
Ping-poll triggers activated today ............ 0
------------------------------------------------------
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
2051