Ssh Server Max-Auth-Tries - Allied Telesis AT-AR3050S Command Reference Manual

S S (SSH) C
ECURE HELL OMMANDS
- -
SSH SERVER MAX AUTH TRIES

ssh server max-auth-tries

Overview Use this command to specify the maximum number of SSH authentication
attempts that the device will allow.
Use the no variant of this command to return the maximum number of attempts
to its default value of 6.
Syntax ssh server max-auth-tries <1-32>
no ssh server max-auth-tries
Default 6 attempts
Mode Global Configuration
Usage By default, users must wait one second after a failed login attempt before trying
again. You can increase this gap by using the command
Example To set the maximum number of SSH authentication attempts to 3, use the
commands:
awplus#
awplus(config)#
Related show ssh server
Commands
C613-50077-01 REV A
Parameter Description
<1-32>
Maximum number of SSH authentication attempts the device will
allow.
configure terminal
ssh server max-auth-tries 3
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
aaa login fail-delay.
2030