Debug Traffic-Shaping - Allied Telesis AT-AR3050S Command Reference Manual

T S C
RAFFIC HAPING OMMANDS
-
DEBUG TRAFFIC SHAPING

debug traffic-shaping

Overview This command enables debugging for the Traffic Shaping feature.
Use the no variant of this command to disable debugging for traffic shaping.
Syntax debug traffic-shaping
no debug traffic-shaping
Default Disabled
Mode Privileged Exec
Usage This command enables debugging for the traffic shaping feature. This will increase
the actions that traffic shaping will log.
Examples To enable debugging traffic shaping, use the following commands:
awplus#debug traffic-shaping
To disable debugging for traffic shaping, use the following commands:
awplus#no debug traffic-shaping
Related show traffic-shaping
Commands
show debugging traffic-shaping
C613-50077-01 REV A Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
2237