Move Rule (Traffic Shaping) - Allied Telesis AT-AR3050S Command Reference Manual

T S C
RAFFIC HAPING OMMANDS
(T S )
MOVE RULE RAFFIC HAPING

move rule (Traffic Shaping)

Overview This command changes the ID of a Traffic Shaping rule by moving it to a new ID.
move rule <10-65535> to <10-9999>
Syntax
Default None
Mode Traffic-Shaping Configuration
Examples To move rule 10 to ID 25, use the following commands:
awplus#
awplus(config)#traffic-shaping
awplus(config-ts)#move rule 10 to 25
awplus(config-ts)#
To move rule 15 to 10, use the following commands:
awplus#
awplus(config)traffic-shaping
awplus(config-ts)#move rule 15 to 10
awplus(config-ts)#
Output Figure 54-1: Example output from the move rule command if the rule cannot
Related show running-config traffic-shaping
Commands
show traffic-shaping rule
C613-50077-01 REV A
Parameter
<10-65535>
<10-65535>
configure terminal
configure terminal
be moved.
% Unable to move rule: from 10 to 20
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
Description
The range of the rule ID to move.
The range of the destination ID for the rule after move.
2239