Allied Telesis AT-AR3050S Command Reference Manual page 1504

A C
UTHENTICATION OMMANDS
-
AUTH WEB FORWARD
To add the DNS Server IP address 192.168.1.10 on interface eth1, use the
following commands:
awplus#
awplus(config)#
awplus(config-if)#
awplus(config-if)#
awplus(config-if)#
awplus(config-if)#
To disable the ARP forwarding feature on interface eth1, use the following
commands:
awplus#
awplus(config)#
awplus(config-if)#
To delete the TCP forwarding port 137 on interface eth1, use the following
commands:
awplus#
awplus(config)#
awplus(config-if)#
To delete the all of TCP forwarding on interface eth1, use the following
commands:
awplus#
awplus(config)#
awplus(config-if)#
C613-50077-01 REV A
configure terminal
interface eth1
switchport mode access
auth-web enable
auth dynamic-vlan-creation
auth-web forward 192.168.1.10 dns
configure terminal
interface eth1
no auth-web forward arp
configure terminal
interface eth1
no auth-web forward tcp 137
configure terminal
interface eth1
no auth-web forward tcp
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
1504