Atmf Select-Area - Allied Telesis AT-AR3050S Command Reference Manual

A T M F
LLIED ELESIS ANAGEMENT
-
ATMF SELECT AREA

atmf select-area

Overview Use this command to access devices in an area outside the core area on the
controller network. This command will connect you to the remote area-master of
the specified area.
This command is only valid on AMF controllers.
The no variant of this command disconnects you from the remote area-master.
atmf select-area {<area-name>|local}
Syntax
no atmf select-area
Mode Privileged Exec
Usage After running this command, use the
of nodes you want to access in the remote area.
Example To access nodes in the area Canterbury, use the command
controller-1#
This displays the following output:
To return to the local area for controller-1, use the command
controller-1#
Alternatively, to return to the local area for controller-1, use the command
controller-1#
Related atmf working-set
Commands
C613-50077-01 REV A
™ (AMF) C
RAMEWORK OMMANDS
Parameter Description
<area-name>
Connect to the remote area-master of the area with this name.
local
Return to managing the local controller area.
atmf select-area Canterbury
Test_network[3]#atmf select-area Canterbury 
==============================================
Connected to area Canterbury via host Avensis:
==============================================
atmf select-area local
no atmf select-area
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
atmf working-set command to select the set
1742