Atmf Cleanup - Allied Telesis AT-AR3050S Command Reference Manual

A T M F
LLIED ELESIS ANAGEMENT

ATMF CLEANUP

atmf cleanup
Overview This command erases all data from NVS and all data from Flash excluding the
following:
•
•
•
•
It then reboots to put the device in a clean state ready to be used as a replacement
node on a provisioned port.
atmf cleanup
Syntax
Mode Privileged Exec
Usage This command is an alias to the
Example To erase data, use the command:
Node_1#
This command will erase all NVS, all flash contents except for
the boot release, and any license files, and then reboot the
switch. Continue? (y/n):y
Related erase factory-default
Commands
C613-50077-01 REV A
™ (AMF) C
RAMEWORK OMMANDS
The current release file and its /flash/.release file
The backup release file and /flash/.backup file
v1 license files /flash/.configs/.swfeature.lic
v2 license files /flash/.configs/.sw_v2.lic
atmf cleanup
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
erase factory-default command.
1706