Allied Telesis AT-AR3050S Command Reference Manual page 1947

SNMP C
OMMANDS
-
SHOW COUNTER SNMP SERVER
Table 1: Parameters in the output of the show counter snmp-server command
Related show snmp-server
Commands
C613-50077-01 REV A
Parameter
outGetNexts
outSetRequests
outGetResponses
outTraps
UnSupportedSecLevel
s
NotInTimeWindows
UnknownUserNames
UnknownEngineIDs
WrongDigest
DecryptionErrors
UnknownSecModels
InvalidMsgs
UnknownPDUHandlers
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
Meaning
The number of SNMP Get-Next PDUs that the SNMP
agent has generated.
The number of SNMP Set-Request PDUs that the SNMP
agent has generated.
The number of SNMP Get-Response PDUs that the
SNMP agent has generated.
The number of SNMP Trap PDUs that the SNMP agent
has generated.
The number of received packets that the SNMP agent
has dropped because they requested a securityLevel
unknown or not available to the SNMP agent.
The number of received packets that the SNMP agent
has dropped because they appeared outside of the
authoritative SNMP agent's window.
The number of received packets that the SNMP agent
has dropped because they referenced an unknown
user.
The number of received packets that the SNMP agent
has dropped because they referenced an unknown
snmpEngineID.
The number of received packets that the SNMP agent
has dropped because they didn't contain the expected
digest value.
The number of received packets that the SNMP agent
has dropped because they could not be decrypted.
The number of messages received that contain a
security model that is not supported by the server.
Valid for SNMPv3 messages only.
The number of messages received where the security
model is supported but the authentication fails. Valid
for SNMPv3 messages only.
The number of times the SNMP handler has failed to
process a PDU. This is a system debugging counter.
1947