Auth-Web-Server Ping-Poll Timeout - Allied Telesis AT-AR3050S Command Reference Manual

A C
UTHENTICATION OMMANDS
- - -
AUTH WEB SERVER PING POLL TIMEOUT

auth-web-server ping-poll timeout

Overview This command modifies the ping poll timeout parameter for the
Web-Authentication feature. The timeout parameter specifies the time in seconds
to wait for a response to a ping packet.
Use the no variant of this command to reset the timeout of ping polling to the
default (1 second).
auth-web-server ping-poll timeout <1-30>
Syntax
no auth-web-server ping-poll timeout
Default The default timeout for ping polling is 1 second.
Mode Global Configuration
To set the timeout of ping polling to 2 seconds, use the command:
Examples
awplus#
awplus(config)#
To set the timeout of ping polling to the default (1 second), use the command:
awplus#
awplus(config)#
Validation show auth
Commands
show auth-web-server
show running-config
C613-50077-01 REV A
Parameter Description
<1-30>
Seconds.
configure terminal
auth-web-server ping-poll timeout 2
configure terminal
no auth-web-server ping-poll timeout
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
1526