Domain-Name - Allied Telesis AT-AR3050S Command Reference Manual

D H C
YNAMIC OST ONFIGURATION
-
DOMAIN NAME

domain-name

Overview This command adds a domain name to the DHCP address pool you are
configuring. Use this command to specify the domain name that a client should
use when resolving host names using the Domain Name System. This sets the
domain name details using the pre-defined option 15.
Note that if you add a user-defined option 15 using the
will override any settings created with this command.
The no variant of this command removes the domain name from the address pool.
domain-name <domain-name>
Syntax
no domain-name
Mode DHCP Configuration
To add the domain name Nerv_Office to DHCP pool P2, use the commands:
Examples
awplus#
awplus(config)#
awplus(dhcp-config)#
To remove the domain name Nerv_Office from DHCP pool P2, use the
commands:
awplus#
awplus(config)#
awplus(dhcp-config)#
Related default-router
Commands
dns-server
option
service dhcp-server
show ip dhcp pool
subnet-mask
C613-50077-01 REV A
P (DHCP) C
ROTOCOL OMMANDS
Parameter
<domain-name>
configure terminal
ip dhcp pool P2
configure terminal
ip dhcp pool P2
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
Description
The domain name you wish to assign the DHCP pool. Valid
characters are any printable character. If the name contains
spaces then you must enclose it in "quotation marks".
domain-name Nerv_Office
no domain-name Nerv_Office
option command, then you
1819