Show Running-Config Nat - Allied Telesis AT-AR3050S Command Reference Manual

NAT C
OMMANDS
-
SHOW RUNNING CONFIG NAT

show running-config nat

Overview Use this command to show the configuration commands that have been used to
configure NAT.
show running-config nat
Syntax
Mode Privileged Exec
Examples To show the configuration commands that have been used to configure NAT, use
the commands:
awplus#
Output Figure 48-7: Example output from the show running-config nat command
C613-50077-01 REV A
show running-config nat
awplus#show running-config nat 
nat 
rule 10 masq http from private to public 
rule 20 portfw http from public with dst dmz.servers.wb 
enable 
!
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
2169