Subnet Mask; Dns Servers; Dynamic Addresses - Allied Telesis AT-AR3050S Command Reference Manual

D H C
YNAMIC OST ONFIGURATION
SHOW IP DHCP POOL
Table 3: Parameters in the output of the show ip dhcp pool command (cont.)
C613-50077-01 REV A
P (DHCP) C
ROTOCOL OMMANDS
Parameter
lease
<days:hours:minutes>
domain

subnet mask

Probe - Status
Probe - Type
Probe - Packets
Probe - Timeout

dns servers

default-router(s)
user-defined options

Dynamic addresses-

Total
Dynamic addresses-
Leased
Dynamic addresses -
Utilization
Static host addresses-
Total
Static host addresses
- Leased
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
Description
The lease duration for address allocated by this
pool.
The domain name sent by the pool to clients. This is
the domain name that the client should use when
resolving host names using DNS.
The subnet mask sent by the pool to clients.
Whether lease probing is enabled or disabled.
The lease probe type configured. Either ping or ARP.
The number of packets sent for each lease probe in
the range 0 to 10.
The timeout value in milliseconds to wait for a
response after each probe packet is sent. In the
range 50 to 5000.
The DNS server addresses sent to by the pool to
clients.
The default router addresses sent by the pool to
clients.
The list of user-defined options sent by the pool to
clients.
The total number of IP addresses that have been
configured in the pool for dynamic allocation to
DHCP clients.
The number of IP addresses in the pool that have
been dynamically allocated (leased) to DHCP
clients.
The percentage of IP addresses in the pool that are
currently dynamically allocated to clients.
The number of static IP addresses configured in the
pool for specific DHCP client hosts.
The number of static IP addresses assigned to
specific DHCP client hosts.
1867