Allied Telesis AT-AR3050S Command Reference Manual page 2241

T S C
RAFFIC HAPING OMMANDS
(T S )
RULE RAFFIC HAPING
comparison process stops, the filtering is applied and the packet is placed into the
correct outgoing queue on the interface.
Examples To create a rule to reserve a minimum bandwidth of 100 Kbps for ssh traffic
between wan and private networks with a priority of 2, use the following
commands:
awplus#configure terminal
awplus(config#traffic-shaping
awplus(config-ts)#rule 10 match ssh from wan to private rate 100
max 1000 priority 2
To create a rule to stop ftp traffic from blocking other outbound traffic, while still
letting it use the full 10Mb link, use the following commands:
awplus#configure terminal
awplus(config)#traffic-shaping
awplus(config-ts)#rule 12 match ftp from lan to internet rate 1
max 10000 priority 7
To create a rule to reserve 3MB for customerA trying to reach the internet, use the
following commands:
awplus#configure terminal
awplus(config)#traffic-shaping
awplus(config-ts)#rule 15 match any from customerA to internet
rate 3000
To remove all traffic-shaping rules, use the following commands:
awplus#configure terminal
awplus(config)#traffic-shaping
awplus(config-ts)#no rule all
To remove rule 10, use the following commands:
awplus#configure terminal
awplus(config)#traffic-shaping
awplus(config-ts)#no rule 10
Related show running-config traffic-shaping
Commands
show traffic-shaping
show traffic-shaping rule
show traffic-shaping rule config-check
show traffic-shaping rule counters
C613-50077-01 REV A Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
2241