Aaa Authentication Auth-Web - Allied Telesis AT-AR3050S Command Reference Manual

AAA C
OMMANDS
-
AAA AUTHENTICATION AUTH WEB

aaa authentication auth-web

Overview This command enables Web-based Port Authentication globally and allows you to
enable an authentication method list (in this case, a list of RADIUS Servers). It is
automatically applied to every interface running Web-based Port Authentication.
Use the no variant of this command to globally disable Web-based Port
Authentication.
aaa authentication auth-web default group {<group-name>|radius}
Syntax
no aaa authentication auth-web default
Default Web-based Port Authentication is disabled by default.
Mode Global Configuration
Usage There are two ways to define servers where RADIUS accounting messages are sent:
•
•
Note that you need to configure an IPv4 address for the VLAN interface on which
We Authentication is running.
Examples To enable Web-based Port Authentication globally for all RADIUS servers, and use
all available RADIUS servers, use the commands:
awplus#
awplus(config)#
radius
To disable Web-based Port Authentication, use the commands:
awplus#
awplus(config)#
Related aaa accounting auth-web default
Commands
C613-50077-01 REV A
Parameter Description
<group-name>
Server group name.
radius
Use all RADIUS servers.
group radius : use all RADIUS servers configured by
command
group <group-name> : use the specified RADIUS server group configured
with the aaa group server
configure terminal
aaa authentication auth-web default group
configure terminal
no aaa authentication auth-web default
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
command
radius-server host
1557